China High Efficiency High Rotational Accuracy Harmonic Drive Gear Head with Good quality

Product Description

Solution Description:

1.Flexspline is a hollow flanging regular cylinder structure.

2.There is a huge-diameter hollow shaft gap in the middle of the cam of the wave generator. The internal style of the reducer has a support bearing.

3.It has a completely sealed framework and is effortless to put in. It is extremely suitable for the situations the place the wire wants to be threaded from the heart of the reducer.

Benefits:

The very first:Substantial precision,higher torque

The second:devoted specialized personnel can be on-the-go to give design and style answers

The 3rd:Manufacturing unit direct revenue good workmanship sturdy good quality assurance

The fourth:Merchandise top quality problems have a one particular-calendar year guarantee time, can be returned for replacement or restore

Organization profile:

 

HangZhou CZPT Technological innovation Co., Ltd. set up in 2014, is dedicated to the R & D plant of large-precision transmission components. At present, the yearly creation potential can attain 45000 sets of harmonic reducers. We firmly feel in top quality 1st. All backlinks from raw components to concluded goods are strictly supervised and managed, which supplies a solid foundation for product high quality. Our products are sold all above the nation and abroad.

The harmonic reducer and other substantial-precision transmission factors had been independently designed by the firm. Our company spends twenty% of its sales every calendar year on the analysis and improvement of new technologies in the industry. There are 5 folks in R & D.

Our gain is as beneath:

1.7 several years of marketing experience

2. 5-particular person R & D team to provide you with technological assist

3. It is marketed at home and abroad and exported to Turkey and Ireland

4. The merchandise top quality is guaranteed with a one-12 months guarantee

five. Goods can be customized

Strength factory:

Our plant has an entire campus The amount of workshops is about three hundred Whether or not it's from the creation of raw materials and the procurement of uncooked supplies to the inspection of completed goods, we are doing it ourselves. There is a comprehensive creation system

HST-III Parameter:

Model Speed ratio Enter the rated torque at 2000r/min Allowed CZPT torque at commence cease The allowable optimum of the common load torque Maximum torque is authorized in an instant Allow the maximum pace to be entered Average input velocity is permitted Again hole layout existence
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 six.two .six twenty.7 2.1 7.9 .7 40.3 4.one 7000 3000 ≤30 10000
eighty nine .nine 27 2.seven twelve.7 one.3 54.one five.five
a hundred 9 .9 32 three.three 12.seven one.3 62.one six.3
17 fifty 18.four 1.9 39 four 29.nine three eighty.5 eight.two 6500 3000 ≤30 15000
80 twenty five.3 2.6 forty nine.five 5 31 three.two one hundred.1 10.two
100 27.six two.eight 62 six.3 45 4.six 124.2 12.7
20 50 28.eight two.9 64.4 six.6 39 four 112.seven 11.5 5600 3000 ≤30 15000
eighty 39.1 4 85 eight.eight fifty four 5.5 146.1 fourteen.nine
a hundred 46 4.seven ninety four.3 9.6 fifty six five.eight 169.one 17.two
120 46 four.seven one hundred ten.2 56 five.eight 169.one 17.2
160 46 4.seven a hundred 10.two fifty six 5.8 169.one 17.two
25 50 44.9 4.6 113 eleven.5 63 6.five 213.nine 21.8 4800 3000 ≤30 15000
80 72.five seven.4 158 16.1 one hundred 10.2 293.3 29.nine
100 seventy seven.one seven.9 181 eighteen.four 124 twelve.7 326.6 33.3
a hundred and twenty seventy seven.one 7.nine 192 19.six 124 twelve.seven 349.6 35.6
32 fifty 87.four eight.nine 248 twenty five.three 124 twelve.7 439 44.8 4000 3000 ≤30 15000
eighty one hundred thirty five.7 thirteen.eight 350 35.six 192 19.six 653 66.six
one hundred 157.6 sixteen.1 383 39.1 248 twenty five.3 744 75.nine
40 100 308 37.two 660 sixty seven 432 forty four 1232 126.seven 4000 3000 ≤30 15000

HSG Parameter:

Model Speed ratio Enter the rated torque at 2000r/min Allowed CZPT torque at begin cease The allowable highest of the typical load torque Maximum torque is allowed in an quick Allow the highest pace to be entered Regular enter velocity is allowed Back gap design existence
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 seven .7 23 two.3 nine .9 46 four.7 14000 8500 ≤20 15000
80 10 1 thirty 3.one fourteen 1.4 61 6.two
a hundred 10 one 36 three.seven fourteen 1.4 70 7.two
17 50 21 two.one forty four four.5 34 3.4 91 nine 10000 7300 ≤20 20000
80 29 two.9 56 five.seven 35 three.6 113 12
one hundred 31 three.two 70 seven.2 51 5.two 143 fifteen
20 fifty 33 three.3 73 7.four 44 4.5 127 13 10000 6500 ≤20 20000
80 44 4.5 96 9.eight 61 six.two one hundred sixty five seventeen
100 fifty two five.3 107 10.nine sixty four six.five 191 20
120 fifty two five.3 113 eleven.5 64 6.5 191 twenty
160 fifty two five.3 120 twelve.2 sixty four six.5 191 20
25 50 fifty one 5.two 127 thirteen 72 7.three 242 twenty five 7500 5600 ≤20 20000
eighty 82 eight.4 178 eighteen 113 12 332 34
one hundred 87 eight.nine 204 21 a hundred and forty fourteen 369 38
120 87 eight.9 217 22 one hundred forty 14 395 forty
32 50 ninety nine 10 281 29 140 fourteen 497 51 7000 4800 ≤20 20000
80 153 16 395 forty 217 22 738 75
a hundred 178 eighteen 433 44 281 29 841 86
forty a hundred 345 35 738 75 484 forty nine 1400 143 5600 4000 ≤20 20000

Exhibition:

Software situation:

FQA:
Q: What need to I offer when I choose gearbox/pace reducer?
A: The best way is to provide the motor drawing with parameter. Our engineer will verify and recommend the most suited gearbox model for your refer.
Or you can also offer underneath specification as nicely:
1) Variety, model and torque.
2) Ratio or output velocity
three) Functioning issue and relationship strategy
4) Quality and set up device name
5) Enter manner and enter velocity
six) Motor model product or flange and motor shaft size

US $349.2
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: 90 Degree
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Single-Step

###

Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 6.2 0.6 20.7 2.1 7.9 0.7 40.3 4.1 7000 3000 ≤30 10000
80 9 0.9 27 2.7 12.7 1.3 54.1 5.5
100 9 0.9 32 3.3 12.7 1.3 62.1 6.3
17 50 18.4 1.9 39 4 29.9 3 80.5 8.2 6500 3000 ≤30 15000
80 25.3 2.6 49.5 5 31 3.2 100.1 10.2
100 27.6 2.8 62 6.3 45 4.6 124.2 12.7
20 50 28.8 2.9 64.4 6.6 39 4 112.7 11.5 5600 3000 ≤30 15000
80 39.1 4 85 8.8 54 5.5 146.1 14.9
100 46 4.7 94.3 9.6 56 5.8 169.1 17.2
120 46 4.7 100 10.2 56 5.8 169.1 17.2
160 46 4.7 100 10.2 56 5.8 169.1 17.2
25 50 44.9 4.6 113 11.5 63 6.5 213.9 21.8 4800 3000 ≤30 15000
80 72.5 7.4 158 16.1 100 10.2 293.3 29.9
100 77.1 7.9 181 18.4 124 12.7 326.6 33.3
120 77.1 7.9 192 19.6 124 12.7 349.6 35.6
32 50 87.4 8.9 248 25.3 124 12.7 439 44.8 4000 3000 ≤30 15000
80 135.7 13.8 350 35.6 192 19.6 653 66.6
100 157.6 16.1 383 39.1 248 25.3 744 75.9
40 100 308 37.2 660 67 432 44 1232 126.7 4000 3000 ≤30 15000

###

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 7 0.7 23 2.3 9 0.9 46 4.7 14000 8500 ≤20 15000
80 10 1 30 3.1 14 1.4 61 6.2
100 10 1 36 3.7 14 1.4 70 7.2
17 50 21 2.1 44 4.5 34 3.4 91 9 10000 7300 ≤20 20000
80 29 2.9 56 5.7 35 3.6 113 12
100 31 3.2 70 7.2 51 5.2 143 15
20 50 33 3.3 73 7.4 44 4.5 127 13 10000 6500 ≤20 20000
80 44 4.5 96 9.8 61 6.2 165 17
100 52 5.3 107 10.9 64 6.5 191 20
120 52 5.3 113 11.5 64 6.5 191 20
160 52 5.3 120 12.2 64 6.5 191 20
25 50 51 5.2 127 13 72 7.3 242 25 7500 5600 ≤20 20000
80 82 8.4 178 18 113 12 332 34
100 87 8.9 204 21 140 14 369 38
120 87 8.9 217 22 140 14 395 40
32 50 99 10 281 29 140 14 497 51 7000 4800 ≤20 20000
80 153 16 395 40 217 22 738 75
100 178 18 433 44 281 29 841 86
40 100 345 35 738 75 484 49 1400 143 5600 4000 ≤20 20000
US $349.2
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: 90 Degree
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Single-Step

###

Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 6.2 0.6 20.7 2.1 7.9 0.7 40.3 4.1 7000 3000 ≤30 10000
80 9 0.9 27 2.7 12.7 1.3 54.1 5.5
100 9 0.9 32 3.3 12.7 1.3 62.1 6.3
17 50 18.4 1.9 39 4 29.9 3 80.5 8.2 6500 3000 ≤30 15000
80 25.3 2.6 49.5 5 31 3.2 100.1 10.2
100 27.6 2.8 62 6.3 45 4.6 124.2 12.7
20 50 28.8 2.9 64.4 6.6 39 4 112.7 11.5 5600 3000 ≤30 15000
80 39.1 4 85 8.8 54 5.5 146.1 14.9
100 46 4.7 94.3 9.6 56 5.8 169.1 17.2
120 46 4.7 100 10.2 56 5.8 169.1 17.2
160 46 4.7 100 10.2 56 5.8 169.1 17.2
25 50 44.9 4.6 113 11.5 63 6.5 213.9 21.8 4800 3000 ≤30 15000
80 72.5 7.4 158 16.1 100 10.2 293.3 29.9
100 77.1 7.9 181 18.4 124 12.7 326.6 33.3
120 77.1 7.9 192 19.6 124 12.7 349.6 35.6
32 50 87.4 8.9 248 25.3 124 12.7 439 44.8 4000 3000 ≤30 15000
80 135.7 13.8 350 35.6 192 19.6 653 66.6
100 157.6 16.1 383 39.1 248 25.3 744 75.9
40 100 308 37.2 660 67 432 44 1232 126.7 4000 3000 ≤30 15000

###

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 7 0.7 23 2.3 9 0.9 46 4.7 14000 8500 ≤20 15000
80 10 1 30 3.1 14 1.4 61 6.2
100 10 1 36 3.7 14 1.4 70 7.2
17 50 21 2.1 44 4.5 34 3.4 91 9 10000 7300 ≤20 20000
80 29 2.9 56 5.7 35 3.6 113 12
100 31 3.2 70 7.2 51 5.2 143 15
20 50 33 3.3 73 7.4 44 4.5 127 13 10000 6500 ≤20 20000
80 44 4.5 96 9.8 61 6.2 165 17
100 52 5.3 107 10.9 64 6.5 191 20
120 52 5.3 113 11.5 64 6.5 191 20
160 52 5.3 120 12.2 64 6.5 191 20
25 50 51 5.2 127 13 72 7.3 242 25 7500 5600 ≤20 20000
80 82 8.4 178 18 113 12 332 34
100 87 8.9 204 21 140 14 369 38
120 87 8.9 217 22 140 14 395 40
32 50 99 10 281 29 140 14 497 51 7000 4800 ≤20 20000
80 153 16 395 40 217 22 738 75
100 178 18 433 44 281 29 841 86
40 100 345 35 738 75 484 49 1400 143 5600 4000 ≤20 20000

Types of Miter Gears

The different types of miter gears include Hypoid, Crown, and Spiral. To learn more, read on. In addition, you'll learn about their differences and similarities. This article will provide an overview of the different types of miter gears. You can also choose the type that fits your needs by using the guide below. After you've read it, you'll know how to use them in your project. You'll also learn how to pair them up by hand, which is particularly useful if you're working on a mechanical component.
gear

Bevel gears

Bevel and miter gears are both used to connect two shafts that have different axes. In most cases, these gears are used at right angles. The pitch cone of a bevel gear has the same shape as that of a spur gear, except the tooth profile is slightly tapered and has variable depth. The pinions of a bevel gear are normally straight, but can be curved or skew-shaped. They can also have an offset crown wheel with straight teeth relative to the axis.
In addition to their industrial applications, miter gears are found in agriculture, bottling, printing, and various industrial sectors. They are used in coal mining, oil exploration, and chemical processes. They are an important part of conveyors, elevators, kilns, and more. In fact, miter gears are often used in machine tools, like forklifts and jigsaws.
When considering which gear is right for a certain application, you'll need to think about the application and the design goals. For example, you'll want to know the maximum load that the gear can carry. You can use computer simulation programs to determine the exact torque required for a specific application. Miter gears are bevel gears that are geared on a single axis, not two.
To calculate the torque required for a particular application, you'll need to know the MA of each bevel gear. Fortunately, you can now do so with CZPT. With the help of this software, you can generate 3D models of spiral bevel gears. Once you've created your model, you can then machine it. This can make your job much easier! And it's fun!
In terms of manufacturing, straight bevel gears are the easiest to produce. The earliest method for this type of gear is a planer with an indexing head. Since the development of CNC machining, however, more effective manufacturing methods have been developed. These include CZPT, Revacycle, and Coniflex systems. The CZPT uses the Revacycle system. You can also use a CNC mill to manufacture spiral bevel gears.
gear

Hypoid bevel gears

When it comes to designing hypoid bevel gears for miter and other kinds of gears, there are several important parameters to consider. In order to produce high-quality gearings, the mounting distance between the gear teeth and the pinion must be within a predefined tolerance range. In other words, the mounting distance between the gear teeth and pinion must be 0.05 mm or less.
To make this possible, the hypoid bevel gearset mesh is designed to involve sliding action. The result is a quiet transmission. It also means that higher speeds are possible without increasing noise levels. In comparison, bevel gears tend to be noisy at high speeds. For these reasons, the hypoid gearset is the most efficient way to build miter gears. However, it's important to keep in mind that hypoid gears are not for every application.
Hypoid bevel gears are analogous to spiral bevels, but they don't have intersecting axes. Because of this, they can produce larger pinions with smooth engagement. Crown bevel gears, on the other hand, have a 90-degree pitch and parallel teeth. Their geometry and pitch is unique, and they have particular geometrical properties. There are different ways to express pitch. The diametral pitch is the number of teeth, while circumferential measurement is called the circumference.
The face-milling method is another technique used for the manufacture of hypoid and spiral bevel gears. Face-milling allows gears to be ground for high accuracy and surface finish. It also allows for the elimination of heat treatment and facilitates the creation of predesigned ease-off topographies. Face-milling increases mechanical resistance by as much as 20%. It also reduces noise levels.
The ANSI/AGMA/ISO standards for geometric dimensioning differ from the best practices for manufacturing hypoid and bevel gears. The violation of common datum surfaces leads to a number of geometrical dimensioning issues. Moreover, hypoid gears need to be designed to incorporate the base pitches of the mating pinion and the hypoid bevel gear. This is not possible without knowing the base pitch of the gear and the mating pinion.

Crown bevel gears

When choosing crown bevels for a miter gear, you will need to consider a number of factors. Specifically, you will need to know the ratio of the tooth load to the bevel gear pitch radius. This will help you choose a bevel gear that possesses the right amount of excitation and load capacity. Crown bevels are also known as helical gears, which are a combination of two bevel gear types.
These bevel gears differ from spiral bevels because the bevels are not intersected. This gives you the flexibility of using a larger pinion and smoother engagement. Crown bevel gears are also named for their different tooth portions: the toe, or the part of the gear closest to the bore, and the heel, or the outermost diameter. The tooth height is smaller at the toe than it is at the heel, but the height of the gear is the same at both places.
Crown bevel gears are cylindrical, with teeth that are angled at an angle. They have a 1:1 gear ratio and are used for miter gears and spur gears. Crown bevel gears have a tooth profile that is the same as spur gears but is slightly narrower at the tip, giving them superior quietness. Crown bevel gears for miter gears can be made with an offset pinion.
There are many other options available when choosing a Crown bevel gear for miter gears. The material used for the gears can vary from plastics to pre-hardened alloys. If you are concerned with the material's strength, you can choose a pre-hardened alloy with a 32-35 Rc hardness. This alloy also has the advantage of being more durable than plastic. In addition to being stronger, crown bevel gears are also easier to lubricate.
Crown bevel gears for miter gears are similar to spiral bevels. However, they have a hyperbolic, not conical, pitch surface. The pinion is often offset above or below the center of the gear, which allows for a larger diameter. Crown bevel gears for miter gears are typically larger than hypoid gears. The hypoid gear is commonly used in automobile rear axles. They are useful when the angle of rotation is 90 degrees. And they can be used for 1:1 ratios.
gear

Spiral miter gears

Spiral bevel gears are produced by machining the face surface of the teeth. The process follows the Hertz theory of elastic contact, where the dislocations are equivalent to small significant dimensions of the contact area and the relative radii of curvature. This method assumes that the surfaces are parallel and that the strains are small. Moreover, it can reduce noise. This makes spiral bevel gears an ideal choice for high-speed applications.
The precision machining of CZPT spiral miter gears reduces backlash. They feature adjustable locking nuts that can precisely adjust the spacing between the gear teeth. The result is reduced backlash and maximum drive life. In addition, these gears are flexible enough to accommodate design changes late in the production process, reducing risk for OEMs and increasing efficiency and productivity. The advantages of spiral miter gears are outlined below.
Spiral bevel gears also have many advantages. The most obvious of these advantages is that they have large-diameter shafts. The larger shaft size allows for a larger diameter gear, but this means a larger gear housing. In turn, this reduces ground clearance, interior space, and weight. It also makes the drive axle gear larger, which reduces ground clearance and interior space. Spiral bevel gears are more efficient than spiral bevel gears, but it may be harder to find the right size for your application.
Another benefit of spiral miter gears is their small size. For the same amount of power, a spiral miter gear is smaller than a straight cut miter gear. Moreover, spiral bevel gears are less likely to bend or pit. They also have higher precision properties. They are suitable for secondary operations. Spiral miter gears are more durable than straight cut ones and can operate at higher speeds.
A key feature of spiral miter gears is their ability to resist wear and tear. Because they are constantly being deformed, they tend to crack in a way that increases their wear and tear. The result is a harder gear with a more contoured grain flow. But it is possible to restore the quality of your gear through proper maintenance. If you have a machine, it would be in your best interest to replace worn parts if they aren't functioning as they should.

China High Efficiency High Rotational Accuracy Harmonic Drive Gear Head     with Good qualityChina High Efficiency High Rotational Accuracy Harmonic Drive Gear Head     with Good quality
editor by czh 2023-01-24